Kilsaran KPRO Grout NSG 2601 is, a non-shrink construction grout, designed for use in thicknesses ranging from 10mm – 100mm, in the following applications;
• Stanchion baseplates
• Bedding precast units
• Machine & Plant baseplates
• Jointing precast concrete panels
• Grouting bearing plinths
• Duct Filling
Suitable for use in temperatures between +5°C and +30°C. Ensure all surfaces are clean and free from dust, dirt and grease. Pre-soak area to be grouted a minimum of 4 hours prior to installation. Remove any ponded water. Mix using a suitable paddle mixer or pump mixer. To create a highly flowable grout, mix the contents of a 25kg bag with 5 litres of water for 2-3 minutes. Less water can be added to create a plastic or stiff mix for plinths and bedding precast applications.
Baseplate: Ensure that a sufficient supply of material will be mixed in order to avoid interruption when filling. Always pour from one side and use air vents were necessary to avoid air entrapment. Pour from a height to ensure maximum compaction and use a rod to aid filling. Do not vibrate the grout. Temporary levelling shims should be greased if they are to be removed after grout hardens.
Formwork: As the grout is free-flowing it is important to ensure the formwork is sufficiently prepared to avoid leaks. A sacrificial concrete mix can be used to fix the baseplate shutter or as a bern. Keep unrestrained areas around the baseplate to less than 150mm.
Curing: Should be as per standard practices for cement-based products. Grout should be protected from strong sunlight and cold weather.
This product offers many advantages over conventional site-mixed or ready-mixed grouts:
• Non-Shrink formula
• High early and ultimate strength
• Can be pumped or poured
• High workability with no segregation
• Long term durability
• Convenient and user-friendly
• Eliminates wastage
• Chloride free