KPRO Grout NSG 2601-HF

Product Application 

Kilsaran KPRO Grout NSG 2601-HF is, a non-shrink construction grout, designed for use in thicknesses ranging from 10mm – 100mm, in the following applications;

  • Large baseplate grouting for
    stanchions, plant and machinery
  • Anchoring of reinforcing steel
  • Jointing of precast concrete
  • Fixing rails and bolts
  • Bedding of precast concrete
  • Duct filling for pre-stressed and
    post-tensioned elements.
  • Soil, ground and rock anchoring
  •  Underpinning

Product Use
Suitable for use in temperatures between +5°C and +30°C. Ensure all surfaces are clean and free from dust, dirt and grease. Pre-soak area to be grouted a minimum of 2 hours before installation to avoid absorption. To achieve a high fluidity grout mix the contents of a 25kg bag with 3.2-3.5 litres of clean potable water. Using excessive water (above 0.2 water/solid ratio) will affect the product’s overall performance. Mixing should be carried out in a suitable container by forced action using a paddle or high shear vane mixer, or grouting pump. The powder should be added gradually to the measured water in the mixing vessel and mixed for 5 minutes until a smooth, cohesive consistency is achieved. Once mixed no further water should be added.

Baseplate: Ensure that a sufficient supply of material will be mixed to avoid interruption when filling. Always pour from one side and use air vents were necessary to avoid air entrapment. Pour from a height to ensure maximum compaction and use a rod to aid filling. Do not vibrate the grout. Temporary levelling shims should be greased if they are to be removed after grout hardens.

Formwork:  As the grout is a free-flowing, it is important to ensure the formwork is sufficiently prepared to avoid leaks. A sacrificial concrete mix can be used to fix the baseplate shutter or as a bern. Keep unrestrained areas around the baseplate to less than 150mm.

Curing:  Should be as per standard practices for cement-based products. Grout should be protected from strong sunlight and cold weather.


  • Non-Shrink formula
  • High early and ultimate strength
  • High flowability with no segregation
  • Can be pumped or poured
  • Long term durability
  • Convenient and User-Friendly
  • Eliminates wastage

Brochure Library


Download information on our ways of working and details on the products we offer.



See Full Brochure List

Technical Downloads


Technical Data Sheet



Safety Data Sheet

Back To Top